Schrittmotor: unipolar/bipolar, 200 Schritte/Umdrehung, 42 x 48 mm, 4 V, 1200 mA hub-zubehoer so the ENABLE pin cannot

so the ENABLE pin cannot be used to turn off power to the load

and the six non-CS versions have the same pinout

Treiber sind für Windows-

so it might be more appropriate to use two single-channel boards instead of one 2-channel board in some space-constrained applications

and a current feedback circuit for each motor outputs an analog voltage on its respective FB pin that is proportional to the output current

Schrittmotor: unipolar/bipolar, 200 Schritte/Umdrehung, 42 x 48 mm, 4 V, 1200 mA hub-zubehoer so the ENABLE pin cannotThis hybrid stepper motor has a step angle of 1. 8 (200 steps revolution). Each phase draws 1. 2 A at 4 V, providing a holding torque of 3. 2 kg cm (44 oz in). The motor features six color coded wires with bare leads, allowing it to be driven by both unipolar and bipolar stepper motor drivers. When used with a unipolar driver, all six wires are used. When used with a bipolar driver, the yellow and white wires in the center can remain unconnected (the