RUKO Bi-metal Hole Saw HSSE-Co 8 with Regular Fine Pitch Toothing Ø 114mm vendor_PATCO Expand spring to install or

Expand spring to install or remove

(1) 6mm Collet

For use with BV500 (S500) and A300T tanning units

1 Ω 1 Ω 10 Ω Accuracy ±(7% of rdg + 2 digit) Operating error ±(10% of rdg + 5 digit) Additional error because of probe- and auxiliary earth typ

including housing

RUKO Bi-metal Hole Saw HSSE-Co 8 with Regular Fine Pitch Toothing Ø 114mm vendor_PATCO Expand spring to install orOverview The fine toothing is particularly suitable for cutting metals. It ensures smoother running and reduces the necessary effort. The reduction in heat development during cutting increases tool life, especially in the case of metals. Suitable for alloyed and non alloyed steels (up to 1. 000 N mm strength), high chromium alloyed steels such as stainless steel, steels resistant to rusts and acids, non ferrous and light metals. The RUKO bi metal hole